Connecting IP Devices to an IP Network
ECLYPSE User Guide 41
Figure 5-12: ECLYPSE Wi-Fi Adapter Position with VAV in Metal Enclosure
Typical Metal Relay Panel/Utility Box Installation
The following image shows where to install an ECLYPSE Wi-Fi Adapter on a metal relay
panel or utility box with a controller inside the panel/box. To maximize wireless range,
the ECLYPSE Wi-Fi Adapter must be installed on the top or side of the panel.
Wireless Adapter
NOT to be installed
inside the panel
Wireless Adapter
installed on top or
side of panel
Figure 5-13: ECLYPSE Wi-Fi Adapter Position with Metal Relay Panel/Utility
Box
Typical Fan Coil Unit Installation
The following example shows where to install an ECLYPSE Wi-Fi Adapter on a fan coil
unit with a controller inside the unit. The ECLYPSE Wi-Fi Adapter must be installed on
the top or side of the unit with the antenna straightened out and away from the metal.
The ECLYPSE Wi-Fi Adapter and antenna should never be installed inside the metal
enclosure.
To Next Page
Loading...