ECLYPSE Web Interface
74 ECLYPSE User Guide
The network name is the Service Set IDentification (SSID) for a
Wi-Fi hotspot. When this controller’s active mode is configured as a:
Hotspot: set a descriptive network name that other wireless
clients will use to find this hotspot.
Client: select an available hotspot from the lists of access
point connections that are within range.
Mesh network: set a network name for the mesh network. All
mesh network nodes use the same network name to
become a member of that mesh network.
This parameter is case sensitive.
When the Active Mode is set to Client, click this icon to select an
available Wi-Fi network from the list of access points that are within
range.
Set the encryption method to be used by the Wi-Fi network:
None: this option should be avoided as it does not provide
any wireless security which allows any wireless client to
access the LAN.
AuthSAE: choose the Simultaneous Authentication of
Equals (SAE) option to secure a mesh network with a
password.
WPA2: select the Wi-Fi Protected Access II option to secure
the Wi-Fi network with a password.
WPA2 Enterprise: Use this option if you are connecting to an
enterprise network that has a working RADIUS
authentication server. This RADIUS server provides user
authentication.
When encryption is used, set the password to access the Wi-Fi
network as a client or the password other clients will use to access
this hotspot. Passwords should be a long series of random
alphanumeric characters and symbols that are hard to guess. This
parameter is case sensitive.
Click to show or hide the password.
To Next Page
Loading...