WEATHERSTRIP/SEALS
TABLE OF CONTENTS
page page
DOOR OPENING WEATHERSTRIP
REMOVAL ............................110
INSTALLATION ........................110
DRIP RAIL WEATHERSTRIP
REMOVAL ............................111
INSTALLATION ........................111
FRONT DOOR GLASS RUN WEATHERSTRIP
REMOVAL ............................111
INSTALLATION ........................112
FRONT DOOR MOUNTED WEATHERSTRIP
REMOVAL ............................112
INSTALLATION ........................112
REAR DOOR BODY MOUNTED
WEATHERSTRIP
REMOVAL ............................112
INSTALLATION ........................112
REAR DOOR GLASS RUN WEATHERSTRIP
REMOVAL ............................113
INSTALLATION ........................113
REAR DOOR MOUNTED WEATHERSTRIP
REMOVAL ............................114
INSTALLATION ........................114
TRUNK OPENING WEATHERSTRIP
REMOVAL ............................114
INSTALLATION ........................114
DOOR OPENING
WEATHERSTRIP
REMOVAL
(1) Remove door opening sill plate (Refer to 23 -
BODY/INTERIOR/DOOR SILL TRIM - REMOVAL).
(2) Pull body mounted weatherstrip from fence
around door opening (Fig. 1).
INSTALLATION
(1) Position color dot on weatherstrip at the B-pil-
lar upper corner.
(2) Engage weatherstrip on the fence at upper
B-pillar and work down the B-pillar.
(3) Engage weatherstrip along the header and
down the A-pillar.
(4) Engage weatherstrip along the sill. There may
be slack material work it to the front of the opening.
(5) Verify weatherstrip sealing.
Fig. 1 FRONT DOOR BODY MOUNTED
WEATHERSTRIP
1 - FRONT DOOR OPENING
2 - FRONT DOOR BODY MOUNTED WEATHERSTRIP
3 - PINCH FLANGE
23 - 110 WEATHERSTRIP/SEALS LH
To Next Page
Loading...
