Draytek Vigor2760 - DNS Setting

Vigor2760 Series User’s Guide
106
4
4
.
.
1
1
.
.
7
7
.
.
2
2
D
D
N
N
S
S
S
S
e
e
t
t
t
t
i
i
n
n
g
g
This page is used to set the DNS server (including primary DNS and secondary DNS) that the
router will use.
Available parameters are listed below:
Item Description
Primary DNS
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default DNS Server IP address:
198.95.1.1 to this field.
Secondary DNS
You can specify secondary DNS server IP address here
because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default secondary DNS Server IP
address: 4.2.2.1 to this field.
Apply
Click it to save the settings.
Reset
Click it to retrieve the default settings of this page.
Refresh
Click it to refresh the web page.
After finished the settings above, click Apply to save the settings.