Vigor2760 Series User’s Guide
95
IPv6
Enable - Check this box to enable the function of static
route.
Interface - Specify an interface supporting IPv6 for the
static route.
Apply
Click it to save the settings.
Refresh
Click it to refresh the web page.
After finished the settings above, click Apply to save the settings.
4
4
.
.
1
1
.
.
4
4
.
.
2
2
S
S
t
t
a
a
t
t
i
i
c
c
R
R
o
o
u
u
t
t
e
e
When you have several subnets in your LAN, sometimes a more effective and quicker way for
connection is the Static route function rather than other method. You may simply set rules to
forward data from one specified subnet to another specified subnet without the presence of
RIP.
This page allows you to create several static routes to be selected for the route. Click
Network>>Static Route>>Static Route to get the following page:
Each item will be explained as follows:
Item Description
Add
Create new NAT profiles.
Edit
Edit the selected NAT profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
To Next Page
Loading...
Need help?
General
