Vigor2760 Series User’s Guide
246
4
4
.
.
1
1
0
0
.
.
2
2
.
.
2
2
G
G
e
e
n
n
e
e
r
r
a
a
l
l
This page allows you to enable or disable the SAMBA service. For the NetBios service of
USB storage disk, you have to specify a workgroup name and a host name. A workgroup
name must not be the same as the host name.
Each item will be explained as follows:
Item Description
Samba Enable
Check the box to enable such function.
Samba Workgroup
The default name will be displayed on the screen. Change
the name if you want.
The workgroup name can have as many as 15 characters and
cannot contain any of the following--- ; : " < > * + = \ | ?.
Samba Host Name
The default name will be displayed on the screen. Change
the name if you want.
The host name can have as many as 23 characters and cannot
contain any of the following--- ; : " < > * + = \ | ?.
Apply
Click it to save the settings.
Reset
Click it to retrieve the default settings of this page.
Refresh
Click it to clear current settings and return to the settings
saved previously.