Vigor2760 Series User’s Guide
198
4
4
.
.
7
7
.
.
1
1
S
S
I
I
P
P
A
A
c
c
c
c
o
o
u
u
n
n
t
t
s
s
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an Account Name or user name, SIP Registrar, Proxy, and
Domain name. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the
destination using AccountName@Domain/Realm as identity.
Note: Selection items for Ring Port will differ according to the router you have.
Each item will be explained as follows:
Item Description
Edit
Modify the selected SIP account profile.
You have to check the SIP account profile you want and then
click this button to open the edit window for modification.
Refresh
Click it to fresh the web page.
Reset
Click it to retrieve the default settings of this page.
Profile Name
Display the names of the SIP accounts. Account 1 ~ Account
6 are named in default.
Register via
Display the registration interface of such SIP account.
Domain/Realm
Display the domain name or IP address of the SIP registrar
server.
Proxy
Display the domain name or IP address of the SIP proxy
server.
Account Number/Name
Display the account name of SIP address before @.
Ring Port
Specify which port will ring when receiving a phone call.
Status
Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. –
means the account is failed to register on SIP server.
To Next Page
Loading...
Need help?
General
