Vigor2760 Series User’s Guide
252
4
4
.
.
1
1
1
1
.
.
2
2
L
L
A
A
N
N
t
t
o
o
L
L
A
A
N
N
Here you can manage LAN-to-LAN connections by maintaining a table of connection profiles.
You may set parameters including specified connection direction (dial-in or dial-out),
connection peer ID, connection type (VPN connection - including PPTP, IPSec Tunnel, and
L2TP by itself or over IPSec) and corresponding security methods, etc.
The router supports up to
32 VPN tunnels simultaneously.
Each item will be explained as follows:
Item Description
Add
Create a new VPN LAN to LAN profile.
Edit
Edit the selected profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
Delete
Remove the selected profile.
Refresh
Click it to fresh the web page.
Enable
Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Name
Display the name of the profile.
Description
Display the comments/description of the VPN profile.
Call Direction
Display the allowed call direction of this LAN-to-LAN
profile.
Remote Network IP
Display the IP address of the remote dial-in user.
To Next Page
Loading...
Need help?
General
