Vigor2760 Series User’s Guide
253
To add a new LAN to LAN profile, please do the following:
1. Click the Add button.
2. The following setting page will appear.
Available parameters are listed as follows:
Item Description
Enable
Check the box to enable such profile.
Name
Type the name of the profile.
Description
Type a description for such profile.
Call Direction
Specify the allowed call direction of this LAN-to-LAN profile.
Both:-initiator/responder
Dial-Out- initiator only.
Dial-In- responder only.
Always On
Check to enable router always keep VPN connection.
Idle Timeout
The default value is 300 seconds. If the connection has been
To Next Page
Loading...
Need help?
General
