Vigor2760 Series User’s Guide
141
Disable – The rule is not activated.
Name
Display the name of the rule profile.
Description
Display filter set comments/description.
Type
Display the direction of packet flow
Schedule
Display the profile(s) that the filter rule will be valid at
certain time interval
Quality of Service
Display the QoS class applied by such profile.
Action
Display the action to be taken when packets match the rule.
To add a filter rule profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
Item Description
Enable
Check the box to enable the profile.
Name
Type the name of the rule profile. Maximum length is 15-
character long.
Description
Enter filter set comments/description.
Type
Set the direction of packet flow.
To Next Page
Loading...
