Vigor2760 Series User’s Guide
189
2. The following setting page will appear.
Available parameters are listed below:
Item Description
Name
Type a name for the TACACS+ server.
Server IP Address
Type the IP address of TACACS+ server.
Port
The UDP port number that the TACACS+ server is using.
The default value is 49.
Server Password
The TACACS+ server and client share a password that is
used to authenticate the messages sent between them. Both
sides must be configured to use the same password.
Confirm Server
Password
Re-type the password for confirmation.
Apply
Click it to save the settings.
Clear
Click it to remove the modification of the web page.
Cancel
Click it to return to previous web page.
3. After finished the settings above, click Apply to save the file. Now, a new TACACS+
profile has been created.
To Next Page
Loading...
Need help?
General
