Vigor2760 Series User’s Guide
280
Username: XXX
Password: password
Confirm ACS Server
Password
Type the password for ACS Server for authentication again
for confirmation.
Register Interface
Display the interface used for connecting to VigorACS
server.
Port
Sometimes, port conflict might be occurred. To solve such
problem, you might change port number for CPE.
CPE URL
Such information is useful for Auto Configuration Server. In
default, the system will detect related information of the CPE
automatically and displayed in this field.
Display the URL of the CPE.
CPE Username
Display the username of the CPE.
CPE Password
Display the password of the CPE.
Confirm CPE Password
Display the password of the CPE for confirmation.
Advanced
Periodic Update – Check the box (Enable) to make the
system send inform message to ACS server periodically (with
the time set in the box of interval time).
Periodic Time (second) –The default setting is Enable.
Please set interval time or schedule time for the router to send
notification to CPE.
STUN Settings
The default is disabled. If you check the box of STUN
Enable, please type the relational settings listed below:
Server Address – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Apply
Click it to save the settings.
Reset
Click it to retrieve the default settings of this page.
Refresh
Click it to clear current settings and return to the settings
saved previously.
To Next Page
Loading...
