Vigor2760 Series User’s Guide
79
2. Click Edit to open the following page.
Available parameters are listed below:
Item Description
Backup
Check the box to enable such profile.
Name
Type the name of the profile.
SIM Pin Code
Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String
1/2
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to
your ISP.
The initial string 1 is shared with APN. In some cases, users
may need another initial AT command to restrict 3G band or
do any special settings.
APN Name
APN (Access Point Name) is provided by your ISP for
identifying different access points.
Modem Dial String
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to
your ISP.
PPP Username
Type the PPP username (optional).
PPP Password
Type the PPP password (optional).
Confirm PPP
Password
Type the password again for confirmation.
Default Route
Check the box to enable the default route for such WAN
profile.
Apply
Click it to save the settings.
Clear
Click it to remove the modification of the web page.
To Next Page
Loading...
Need help?
General
