Vigor2760 Series User’s Guide
83
To edit the profile, simply check the profile box you want to
edit and then click this button.
Delete
Remove the selected LAN profile.
Refresh
Click it to refresh the web page.
Enable
Display the activation status for such interface.
Enable – The LAN profile is activated.
Disable –The LAN profile is not activated.
Name
Display the profile name for LAN interface.
Description
Display a brief description for such profile.
IP Address
Display the IP address of such LAN interface.
Subnet Mask
Display the subnet mask address of such LAN interface.
NAT
Display if NAT function is enabled or not.
VLAN
Display the port interface number grouped under such
VLAN.
To add LAN profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
To Next Page
Loading...
