Duplo DP-440 - Long Mode [Available Only with Long Paper]

4
Miscellaneous Functions
103
The “AUTO LCD OFF” setting in the “SPECIAL
FUNCTION Screen” changes to "10 MIN" (when 10 minutes
is set).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “12. END”, and
then press (OK) key.
Pressing (OK) key set the auto LCD off function.
Tip
• Pressing (SPECIAL FUNCTION) key set the
auto LCD off function also.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Long Mode
Available only with Long Paper
The long mode is set to when the length of the fed paper exceeds A3 in size (420 mm).
This mode allows paper up to 540 mm to be feed.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Open the panel cover.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the LCD
panel.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Continue Page •••
7.LONG MODE
8.INK CIRCULATION
9.TAPE CLUSTER
1.FINE START AUTO
10 MIN
SEQ.BATCH
3 PRINTS
5 MIN
2.AUTO CLEAR
3.PRE-PRINT
4.BATCH PRINT
5.AUTO POWER OFF
6.AUTO LCD OFF 10 MIN
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
OFF
OFF
4.BATCH PRINT
9.TAPE CLUSTER
11.DRUM SIZE
SEQ.BATCH
5.AUTO POWER OFF 10 MIN
6.AUTO LCD OFF 10 MIN
OFF
7.LONG MODE
8.INK CIRCULATION
10.DOUBLE FEED DETECTION
12.END
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
OFF
OFF
A3
Special Functions