Duplo DP-440 - Double Feed Detection

108
Special Functions
Double Feed Detection
This mode stops printer operation when double feeding of paper is detected.
Check the paper feed state, and resume paper feed by pressing the “PRINT” key.
Double feeding is sometimes detected when the following paper is feed:
• Colored print paper
• Paper printed on both sides
• Reprinted paper
• Thick stock paper
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Open the panel cover.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the LCD
panel.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “DOUBLE
FEED DETECTION”, and then press (OK)
key.
Each press of “CURSOR” keys moves to a different item and
that item is displayed highlighted.
Pressing (OK) key set the highlighted item.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “ON”, and then
press (OK) key.
Default is “OFF”. “Cancel” cancels this screen, and
redisplays the previous screen.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4.BATCH PRINT
9.TAPE CLUSTER
11.DRUM SIZE
SEQ.BATCH
5.AUTO POWER OFF 10 MIN
6.AUTO LCD OFF 10 MIN
7.LONG MODE
8.INK CIRCULATION
12.END
OFF
10.DOUBLE FEED DETECTION
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
ON
ON
A3
ON
OFF
CANCEL
DOUBLE FEED DETECTION
SELECT AN ITEM WITH
AND PRESS