Duplo DP-440 - Page 108

4
Miscellaneous Functions
107
Special Functions
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “TAPE
CLUSTER”, and then press (OK) key.
Each press of “CURSOR” keys moves to a different item and
that item is displayed highlighted.
Pressing (OK) key set the highlighted item.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “ON”, and then
press (OK) key.
Default is “OFF”. “Cancel” cancels this screen, and
redisplays the previous screen.
The “TAPE CLUSTER” setting in the “SPECIAL
FUNCTION Screen” changes to "ON". (when the tape
cluster is installed).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “12. END”, and
then press (OK) key.
Pressing (OK) key set the tape cluster function.
Tip
• Pressing (SPECIAL FUNCTION) key set the
tape cluster function also.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
ON
CANCEL
OFF
TAPE CLUSTER
SELECT AN ITEM WITH
AND PRESS
1.FINE START AUTO
10 MIN
SEQ.BATCH
3 PRINTS
5 MIN
2.AUTO CLEAR
3.PRE-PRINT
4.BATCH PRINT
5.AUTO POWER OFF
6.AUTO LCD OFF 10 MIN
7.LONG MODE
8.INK CIRCULATION
9.TAPE CLUSTER
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
ON
ON
4.BATCH PRINT
9.TAPE CLUSTER
11.DRUM SIZE
SEQ.BATCH
5.AUTO POWER OFF 10 MIN
6.AUTO LCD OFF 10 MIN
OFF
7.LONG MODE
8.INK CIRCULATION
10.DOUBLE FEED DETECTION
12.END
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
ON
ON
A3
1.FINE START AUTO
10 MIN
SEQ.BATCH
3 PRINTS
5 MIN
2.AUTO CLEAR
3.PRE-PRINT
4.BATCH PRINT
5.AUTO POWER OFF
6.AUTO LCD OFF 10 MIN
7.LONG MODE
8.INK CIRCULATION
9.TAPE CLUSTER
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
ON
OFF