96
Auto Clear
This function automatically clears the display (settings) on the control panel when the machine is not operated
for a specified period of time. The specified time period can be set for 5 minutes, 10 minutes, 15 minutes, or
OFF. (The default setting is “OFF”.)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Open the panel cover.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (SPECIAL FUNCTION) key.
The “SPECIAL FUNCTION” is displayed on the LCD
panel.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select “AUTO
CLEAR”, and then press (OK) key.
Each press of “CURSOR” keys moves to a different item and
that item is displayed highlighted.
Pressing (OK) key set the highlighted item.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press “CURSOR” keys to select the auto clear
time, and then press (OK) key.
Default is “OFF”. “Cancel” cancels this screen, and
redisplays the previous screen.
5.AUTO POWER OFF
6.AUTO LCD OFF
7.LONG MODE
8.INK CIRCULATION
9.TAPE CLUSTER
3.PRE-PRINT
4.BATCH PRINT
1.FINE START AUTO
OFF
OFF
OFF
OFF
BATCH
0 PRINTS
2.AUTO CLEAR OFF
SPECIAL FUNCTION
SELECT AN ITEM WITH
AND PRESS
5 MIN
15 MIN
OFF
CANCEL
10 MIN
AUTO CLEAR
SELECT AN ITEM WITH
AND PRESS
Special Functions
To Next Page
Loading...
