83
4
4
Other Functions
Continue Page....
●
Specifying “POLYGON”
Touch "AREA".
Touch "POLYGON".
Touch the start point of the area you want to specify.
Decide each point of polygon so that each side
of the polygon does not cross. If they cross,
incomplete polygonal area is made.
Move your fi nger or the stylus pen while touching the
screen and remove at the end of the point. (The fi rst
side is specifi ed here.)
Touch the start point of the second side and move your
fi nger or the stylus pen while touching it and remove
from at the end of the point again. (The
second side is specifi ed here.) In a similar way, you can
specify up to pentadecagon. If the shape is
within pentadecagon, the end point and the start point
are connected, which makes polygon, by
touching "OK".
● You can touch "OK" after specifying the second or
more sides.
● When you want to change the start point after once
it is specifyed, touch the start point.
Edit Function: Edit Image
REFERENCE
IMPORTANT
To Next Page
Loading...
Need help?
General