Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016104
6.8 Update machine software
Information
In machines with software version up to and including A.3.27 a
bootloader update must be performed. In machines with software
version from A.3.29 the software update can be performed imme-
diately.
1. Download the bootloader software from the Dürkopp Adler
website (https://software.duerkopp-adler.com/maschinen-
programme.html).
2. Unpack the file on a USB key.
2 folders are created: boo
tscr and update.
3. Insert the USB key (2) in the USB port (3) at the control (1).
4. Switch on the machine.
Th
e update starts. The LEDs (4) light up.
Th
e update is finished when only the POWER LED glows.
Fig. 68: Update machine software (1)
(1) - Control
(2) - USB key
(3) - USB-Port
(4) - LEDs
To Next Page
Loading...
