Operation
Operating Instructions 650-10 - 03.0 - 08/2016 23
4.4 Threading the needle thread
Fig. 4: Threading the needle thread
To thread the needle thread:
1. Plug the thread reels on to the thread reel holders and feed
th
e needle and hook threads through the unwinding bracket.
Important
The unwinding bracket must be horizontal and be positioned
a
bove the thread reels.
2. Thread the needle thread as shown above.
CAUTION
Risk of injuries from cutting parts!
Punctures possible.
Switch off the machine before threading the
n
eedle thread.
To Next Page
Loading...
