Decommissioning
Operating Instructions 650-10 - 03.0 - 08/2016 133
9 Decommissioning
You need to perform a number of activities if the machine is to be
shut down for a longer period of time or completely decommissioned.
Decommission the machine as follows:
1. Switch off the main switch.
2. Unplug the power plug.
3. If present, disconnect the pn
eumatic connection.
4. Remove residual oil from the oil pan under the sewing material
supp
ort using a cloth.
5. Cover the control panel to protect it from cont
amination.
6. Cover the controller to protect it from soiling.
7. Cover the entire machine if possible to protect it from contam-
ination and damage.
WARNING
Risk of injury due to a lack of care!
Serious injuries may occur.
ONLY clean the machine when it is switched off.
Allow ONLY trained personnel to disconnect the
mach
ine.
CAUTION
Skin damage due to contact with oil!
Oil can cause a rash if it com
es into contact with
skin.
Avoid contact with oil residues.
To Next Page
Loading...
