DURKOPP ADLER 650-10 - Displaying Software Version (OP7000)

Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 101
6.5.3 Copying the sewing program
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to copy an existing sewing program:
1. Select a sewing program ( p. 79).
2. Tap the P
COPY
button.
 Th
e sewing program is copied and saved in the next free
program slot. An appropriate message is displayed.
6.5.4 Deleting the sewing program
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to delete an existing sewing program:
1. Select a sewing program ( p. 79).
2. Tap the P
DEL
button.
 A
message is displayed asking whether you really wish to
delete the active sewing program.
3. To delete the program, confirm by tapping the Ye
s button.
 Th
e sewing program is deleted. An appropriate message is
displayed.