Maintenance
Operating Instructions 650-10 - 03.0 - 08/2016 111
7 Maintenance
This chapter describes maintenance work that needs to be carried
out on a regular basis to extend the service life of the machine
and achieve the desired seam quality.
Advanced maintenance work may only be carried out by qualified
specialists ( Service Instructions).
WARNING
Risk of injury from sharp parts!
During maintenance work, the machine may start
u
p unintentionally and cause puncture injuries.
Switch off the main switch.
Only perform maintenance work when the
mach
ine is switched off.
WARNING
Risk of injury from moving parts!
During maintenance work, the machine may start
u
p unintentionally and cause crushing.
Switch off the main switch.
Only perform maintenance work when the
mach
ine is switched off.
To Next Page
Loading...
