Setup
Operating Instructions 650-10 - 03.0 - 08/2016 117
8Setup
8.1 Check the scope of delivery
The scope of delivery depends on your specific order.
Check that all parts required are present before installing the
mach
ine.
8.2 Removing the transport locks
When you have installed the machine which you bought, you must
remove the following transport locks:
• Lashing straps and wooden blocks from the machine head,
the t
abletop and the stand
• Restrain block and lashing straps from the sewing drive
WARNING
Risk of injury from cutting parts!
Cutting ist possible.
Only qualified personnel is allowed to set up the
mach
ine.
Wear safety gloves
WARNING
Risk of injury from moving parts!
Crushing is possible.
Only qualified personnel is allowed to set up the
mach
ine.
Wear safety gloves .
To Next Page
Loading...
