Setup
Operating Instructions 650-10 - 03.0 - 08/2016130
8.9.5 Connecting the control panel
Connecting the control panel OP3000
Fig. 88: Connecting the control panel OP3000
Connect the OP3000 as follows:
1. Screw the control panel (4) on the bracket (3) and align it.
2. Plug the plug for the cable (1) on to the control panel, through
the opening in the table top (2) to the control cabinet, and
connect it to the socket (X170 Panel).
(1) - Cable
(2) - Table top opening
(3) - Retainer
(4) - Control panel
To Next Page
Loading...
