DURKOPP ADLER 650-10 - Service Settings via Software (OP3000); OP3000 Control Panel Basics

Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/2016 37
5 Service settings via software (OP3000)
5.1 Basic operation
All settings for the 650-10 are performed using the OP3000 control
panel. If your machine is controlled by a different control panel,
continue on  p. 65.
Fig. 15: OP3000
Keys and functions
(1) - Upper softkey
(2) - Lower softkey
(3) - Plus/minus key
(4) - Arrow key
(5) - F key
(6) - Arrow key
(7) - S key
(8) - Arrow key
(9) - OK key
(10)- P key
(11)- Arrow key
(12)- ESC key
(13)- Numeric keys
(14)- Display
①
②
③ ⑤ ⑥
⑧
⑦
⑨
⑪
⑩
⑭⑬⑫
④
No. Key Function
①
Upper
softkey
Assignment is different for each menu
②
Lower
softkey
Assignment is different for each menu
③
• Switch between increase and decrease the fullness
• Change sign