Operation
Operating Instructions 650-10 - 03.0 - 08/201636
Altering
the fullness
• Press fullness key or additional pedal.
The selected fullness value is activated.
At seam end
Remove
the sewing
ma
terial
• Press the Pedal fully back and keep it there.
Th
e end bartack is sewn (if activated).
The threads are cut (if activated).
The machine stops in the 2
nd
position.
The needle is up. The sewing feet are raised.
• Remove the sewing material.
• Release the Pedal.
The sewing feet are lowered.
To Next Page
Loading...
