Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/201670
6.2 Controller operating modes
The controller offers 4 different operating modes:
• MAN ( p. 71)
Manual mode is the simplest operating mode.
In Manual mode, there are no sewing programs and no in-
puts for individual sewing steps.
Any changes made to parameters are applied immediately
during the sewing process.
• AUTO ( p. 76)
Automatic mode allows sewing programs to be executed.
The seams are divided into individual steps within the se-
wing programs. Each step is assigned its own individual se-
wing parameters such as fullness etc.
• EDIT ( p. 85)
In Edit mode, new sewing programs can be created
(PROGRAMMING), edited, deleted, copied and mirrored
(EDIT) and also optimized (LENGTH CORRECTION).
• SERVICE ( p. 103)
Service mode contains functions for use during service work.
Service mode is passcode-protected to avoid accidentally
changing the machine settings.
To Next Page
Loading...
