Setup
Operating Instructions 650-10 - 03.0 - 08/2016118
8.3 Assembling the stand
Fig. 78: Assembling the stand
Fit the stand as follows:
1. Attach the main pedal (1) to
the cross strut (2).
2. Attach the additional pedal (optional) to the cross strut (2).
3. Attach the cross strut (2) to the stand.
4. After the machine has been fully assembled, align the pedals
( p. 120).
5. Turn the adjusting screw (3) to ensure that the stand is posi-
tioned securely. All 4 feet of the stand must be in contact with
the floor.
(1) - Main pedal
(2) - Cross strut
(3) - Adjusting screw (covered)
To Next Page
Loading...
