Operation
Operating Instructions 650-10 - 03.0 - 08/201628
Fig. 8: Thread tension
4.7.1 Setting the needle thread tension
Fig. 9: Setting the needle thread tension
You set the needle thread tension as follows:
1. Set the main tensioner (4) via the control panel so that an
even
stitch pattern is achieved.
When the thread is cut, the main tensioner (4) is opened auto-
matically.
(1) - Identical needle thread and bobbin thread tension
(2) - Bobbin thread tension higher than needle thread tension
(3) - Needle thread tension higher than bobbin thread tension
(1) - Main tensioner
To Next Page
Loading...
