Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/201650
5.5 Easy mode
Prerequisite: You are in Manual mode ( p. 41) or in Automatic
mode ( p. 45).
If is assigned to the upper softkey:
1. Press the upper softkey .
Th
e following appears on the display:
Fig. 23: Easy mode (1)
2. Continue with step 3.
If is not assigned to the upper softkey:
1. Press the key.
Th
e softkey menu appears on the display:
Fig. 24: Easy mode (2)
2. Press key 5.
3. Press OK to
load the program number.
OR:
To Next Page
Loading...
