Safety
Operating Instructions 650-10 - 03.0 - 08/2016 9
2 Safety
This chapter contains basic information for your safety. Read the
instructions carefully before setting up or operating the machine.
Always follow the information included in this section. Failure to
do so can result in serious injury and property damage.
2.1 Basic safety instructions
The machine should only be used as described in these
instructions.
The instructions should be available at
the machine's location at
all times.
Work on live components and equipme
nt is prohibited. Exceptions
are defined in the regulations in DIN VDE 0105.
For the following work, switch off the
machine at the main switch
or disconnect the power plug:
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
• Threading
Missing or faulty spare parts could impair safety and damage the
mach
ine. Only use original spare parts from the manufacturer.
Transport Use a sturdy lifting carriage or forkl
ift truck for transporting the
machine. Raise the machine max. 20 mm and secure it to prevent
it
from slipping off.
Setup The power cable must have a plug that is authorized for use in
the
country in which the machine is being used. The power plug
may only be connected to the power cable by qualified specialists.
Obligations
of the operator
Observe the country-specific safety and accident prevention reg-
ulations and the legal regulations concerning industrial safety and
the
protection of the environment.
To Next Page
Loading...
