Setup
Operating Instructions 650-10 - 03.0 - 08/2016 125
8.8 Inserting the machine head
Fig. 83: Inserting the machine head
To insert the machine head:
1. Using the transport eye (1), lift the machine upper part and
insert it into the cut-out on the table top.
2. After the upper part has been placed in position, immediately
connect the bracket (2) which prevents the upper part coming
loose if the table top is tipped.
WARNING
Risk of injury from tipping machine upper part!
Crushing is possible.
Secure the machine upper part against tipping
wh
en you transport the machine.
(1) - Transport eye (2) - Clamping plate
To Next Page
Loading...
