Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 85
Changing parameters during the seam
1. Press Pedal to position 0.
2. Change the desired parameter on the control panel.
3. Push the pedal forwards and sew.
Th
e seam will be sewn using the altered parameter value.
Cancel sewing program
1. Press the Pedal fully back.
Th
e sewing program is canceled.
6.5 Programming mode (EDIT)
Fig. 54: Programming mode (EDIT)
Header (1)
The EDIT operating mode is displayed.
(1) - Header
(2) - Left pane
(3) - Middle pane
(4) - Right pane
To Next Page
Loading...
