Operation
Operating Instructions 650-10 - 03.0 - 08/2016 35
4.10 Sewing
Before starting sewing
Initial
situation
• Pedal in rest position.
Machine is at a standstill.
Needle is up. Sewing foot is down.
Position
se
wing
material
at seam
be
ginning
• Press the Pedal halfway back.
The sewing feet are raised.
• Position the sewing material.
• Release the Pedal.
The sewing feet are lowered onto the sewing
material.
At seam beginning
Start bartack
and sewing
the seam
• Push the Pedal forwards and keep it there.
Start bartack is sewn (if specified).
Then the machine sews along the seam at the speed
determined by the Pedal.
In the middle of the seam
Stopping
sewing
• Release the Pedal (position 0).
The machine stops in the 1
st
position (needle down)
or in the needle up position (depending on the setting
chosen).
The sewing foot is down or raised
(depending on the setting chosen).
Continue
se
wing
(after relea-
sing the
pe
dal)
• Press the Pedal forwards.
Th
e machine continues to sew at the speed
determined by the Pedal.
Intermediate
raisin
g
• Press the Pedal halfway back.
The sewing feet are raised.
• Correct the sewing material.
• Release the Pedal.
The sewing feet are lowered.
To Next Page
Loading...
