Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/201692
6.5.2 Creating a new sewing program
(PROGRAMMING)
Prerequisite:
• Operating mode EDIT is displayed.
Proceed as follows to create a new sewing program:
1. Tap the P
NEW
button.
Th
e PROGRAMMING user interface is displayed.
Pressing the P button displays the number of the next free
program slot.
Fig. 59: Creating a new seam program (PROGRAMMING) (1)
Parameters Meaning
Foot Stroke Alternation Sewing foot alternation whilst the needle is
in the sewing material
Value range: 0 – 2.5 mm
Foot Pressure Sewing foot pressure
Value range: 1 – 10
Maximum Speed Max. sewing speed/speed
Value range: 100 – 4000
To Next Page
Loading...
