Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 91
EDIT mode Other sewing step parameters
A tap on the Other sewing step parameters button will bring up
an overview of all available parameters.
Fig. 58: Other sewing step parameters
Parameters Meaning
Backtack at Start Bartack at seam beginning
Value range: 1 (= on) or 0 (= off)
Backtack at End Bartack at seam end
Value range: 1 (= on) or 0 (= off)
Thread Trimmer Thread trimmer
Value range: 1 (= on) or 0 (= off)
To Next Page
Loading...
