Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 71
6.3 Manual mode MAN
Fig. 45: Manual Mode MAN
Header (1)
The MAN operating mode is displayed.
Left pane (2)
Buttons for manually inputting the fullness are displayed here.
Middle pane (3)
The symbols for all the parameters that can be set in MAN ope-
rating mode are displayed here. The gray fields above the para-
meter symbols show the respective current values.
Right pane (4)
Another user interface or another operating mode can be selected
here.
(1) - Header
(2) - Left pane
(3) - Middle pane
(4) - Right pane
To Next Page
Loading...
