Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/201640
Canceling value editing
If you press ESC when editing value fields, you can cancel the
entry without having to apply your changes.
5.2 Controller operating modes
The controller offers 5 different operating modes:
• Manual mode ( p. 41)
Manual mode (program number 000) is the simplest opera-
ting mode.
In Manual mode, there are no sewing programs and no in-
puts for individual sewing steps.
Any changes made to parameters are applied immediately
during the sewing process.
• Automatic mode ( p. 45)
Automatic mode (program number 001 – 999) allows sewing
programs to be executed.
The seams are divided into individual sections (steps) within
the sewing programs. Each step is assigned its own individu-
al parameters such as fullness, curve support etc.
• Easy mode ( p. 50)
Easy mode allows the operator to create new sewing pro-
grams in a quick and easy fashion.
• Edit mode ( p. 54)
In Edit mode, sewing programs can be created, changed
(Edit mode), deleted, copied and mirrored (right or left slee-
ve).
• Service mode ( p. 62)
Service mode contains functions for use during service work.
Service mode is passcode-protected to avoid accidentally
changing the machine settings.
To Next Page
Loading...
