Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/201638
Display and selection
The display shows menu items and value fields that you can select.
Activated entry
The relevant activated entry is highlighted.
④
• Selection to the left
• Back one menu level
⑤
F Function is different for each menu
⑥
• Decrease the value
• Scroll through the list (downwards)
⑦
S Function is different for each menu
⑧
• Selection to the right
⑨
OK • Confirm the settings
• Activate the input
⑩
P •Start Edit mode
⑪
• Increase the value
• Scroll through the list (upwards)
⑫
ESC • Cancel the function
• Exit the menu
⑬
0 – 16 • Set the fullness
• Enter the parameter value
(if the field for the parameters is activated)
• Select the parameter shown on the display
No. Key Function
To Next Page
Loading...
