Setup
Operating Instructions 650-10 - 03.0 - 08/2016 131
Connecting the control panel OP7000
Fig. 89: Connecting the control panel OP7000
To connect the control panel OP7000:
1. Tighten the control panel (8) to the bracket (7) and align it.
2. Insert the plug for the cable (6) at the control panel, guide it
thro
ugh the opening in the tabletop (5) to the controller, and
connect it to the socket (X170b).
(1) - Cable
(2) - Table top opening
(3) - Retainer
(4) - Control panel
To Next Page
Loading...
