Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016100
Mode
PROGRAMMING
Other sewing step parameters
A tap on the Other sewing step parameters button will bring up
an overview of all available parameters.
Fig. 65: Other sewing step parameters
Backtack at End Bartack at seam end
Value range: 1 (= on) or 0 (= off)
Thread Trimmer Thread trimmer
Value range: 1 (= on) or 0 (= off)
Grading Factor Grading factor
Value range: 0.0 – 6.0 (% per size)
Parameters Meaning
Parameters Meaning
Foot Stroke Alternation Sewing foot alternation whilst the needle
is in the sewing material
Value range: 0 – 2.5 mm
Foot Pressure Sewing foot pressure
Value range: 1 – 10
To Next Page
Loading...
