Operation
Operating Instructions 650-10 - 03.0 - 08/201620
Switching on the machine
This is how you switch on the machine:
1. Press the main switch (1) down to position I.
POWER LED illuminates, MESSAGE LED flashes briefly
.
The splash screen appears on the display:
• On the left, the control panel firmware
• On the right, the controller software version
The machine performs a reference run and is ready for
sewing when the display shows the start screen.
Switching off the machine
This is how you switch off the machine:
1. Press the main switch (1) up to position 0.
Th
e control panel shuts down. When the POWER LED goes
out, the machine and the controller are disconnected from
the power supply.
To Next Page
Loading...
