Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/201646
The following table shows the individual symbols on the display
and the functions of the keys on the control panel.
Before starting sewing
Symbol Meaning
Quick programming (depending on the assignment)
• Press the upper softkey
Quick access function (softkey menu)
• Press the lower softkey
Program number
Value range: 000 – 999
•Use
/ to select the parameter
•Use
/ to change the program number.
OR:
• Input the program number using the numeric
keys 0 – 9 and confirm with OK as required
If you select program 000, the controller selects
Manual mode.
Right sleeve / left sleeve
The machine can sew only right sleeves, only left slee-
ves, or right and left sleeves alternately.
•Use
/to select a right sleeve or a left sleeve
(if programs exist for both)
Steps
Number of steps contained in the current sewing
program.
Stitch length
Value range: 1.0 – 4.0 mm
The stitch length can be altered before starting sewing.
The altered value applies throughout the entire sewing
program.
•Use
/ to select the parameter
•Use
/to adjust the stitch length
To Next Page
Loading...
