Service settings via software (OP3000)
Operating Instructions 650-10 - 03.0 - 08/201656
Changing further parameters for the selected sewing
program
This menu allows further parameters for the current sewing
program to be changed.
Change further parameters as follows:
1. Use /to select the field .
2. Press the OK key.
Th
e submenu opens.
3. Use
/ to select the desired parameter.
4. Press the OK
key to activate or deactivate the parameter, or
use / to change its value and press OK to confirm it.
Symbol Meaning
Thr. Tens. (thread tension)
Stitchlen. (stitch length)
Foot Press. (sewing foot pressure)
Fulln. Corr. (fullness correction)
Start Tack (bartack at seam beginning)
End Tack (bartack at seam end)
Thread Trim (thread cutter)
To Next Page
Loading...
