Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 83
2. Tap the OK button.
ļ Th
e correction value is saved, and the previous user inter-
face is displayed again.
Information
If changed in AUTO operating mode, the new correction value
remains active until the controller changes to the next program.
AUTO mode Other program parameters
A tap on the Other program parameters button will bring up an
overview of all available parameters.
Fig. 52: Other program parameters
Parameters Meaning
Foot Pressure Sewing foot pressure
Value range: 1 ā 10
To Next Page
Loading...
