Settings via software (OP7000)
Operating Instructions 650-10 - 03.0 - 08/2016 95
material should be programmed (Program other side) or
the programming should be ended (Finish).
Th
e selected function is indicated by an activated control
field.
10. Tap the OK bu
tton.
Th
e sewing program is saved. Depending on which function
is selected, different buttons are displayed:
Tapping the Abort button close
s the selection window and brings
up the AUTO user interface. All previously entered data is deleted!
Parameters that can be set
The following table describes the parameters that can be set on
the PROGRAMMING user interface.
Function Button
Mirror programmed side to other side AUTO
Program other side PROGRAMMING
Finish AUTO
Symbol/button Meaning
Input the program name
There is only one display under
PROGRAMMING. A new sewing program
is automatically assigned the next free
program slot.
Select the right or left piece to be sewn
Set the sewing material size, p. 97
To Next Page
Loading...
