Eaton easy500, easy700

8 Appendix
8.3 Technical data
Operating instructions 05/10 MN05013003Z-EN www.eaton.com 215
8.3.4.3 EASY512-DA-…, EASY719-DA-...
EASY512-DA-… EASY719-DA-…
Digital inputs
Number 8 12
Inputs usable as analog
inputs
I7, I8 I7, I8, I11, I12
Status display
LCD (if provided) LCD (if provided)
Potential isolation
from power supply No No
between digital inputs
No No
from the outputs
Yes Yes
Rated voltage
Nominal value 12 V DC 12 V DC
At signal “0” 4 V DC (I1 - I8) 4 V DC (I1 - I12,)
At signal ”1” 8 V DC (I1 - I8) 8 V DC (I1 - I12)
Input current on signal 1 3.3 mA at 12 V DC
(I1 - I6)
3.3 mA at 12 V DC
(I1 to I6, I9 - I10)
I7, I8, (I11, I12)
1.1 mA at 12 V DC 1.1 mA at 12 V DC
Delay time from 0 to 1
Debounce ON 20 ms 20 ms
Debounce OFF Normally 0.3 ms (I1 - I6)
Normally 0.35 ms (I7, I8)
Normally 0.3 ms (I1 - I6, I9, I10)
Normally 0.35 ms (I7, I8, I11, I12)
Delay time from 1 to 0
Debounce ON
20 ms 20 ms
Debounce OFF
Normally 0.3 ms (I1 - I6)
Normally 0.15 ms (I7, I8)
type 0.4 ms
(I1 to I6, I9 - I10)
Normally 0.2 ms (I7, I8, I11, I12)
Cable length (unscreened)
100 m 100 m