EasyManua.ls Logo

ECKELMANN E-Control CNC - Safety Instructions and Hazard Warnings; Explanations of Safety Instructions

ECKELMANN E-Control CNC
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10 / 97
Explanations regarding the safety instructions
Safety instructions and hazard warnings are composed of five parts:
1. An icon at the margin
2. A bar with the signal word, the colour of which dep
ends on the danger level.
3. A short, clear description of the danger
4. A description of possible consequences
5. A list of measures for danger prevention
Example:
x
DANGER
High voltage in power supply unit
Severe injuries or death due to electric shock
Pull off mains plug prior to open the housing
Do not put objects in the venting slots during operation
The danger levels are described in the following table:
Tabelle 1:
Table 1: Warning levels
Marking bar Warning level
Severe consequential damage such as death or irreversible
injuries
Imminent hazardous situation if the precautions are not observed.
Severe consequential damage such as death or irreversible
injuries
Potentially hazardous situation if the precautions are not observed.
Slight injuries (reversible)
Potentially hazardous situation if the precautions are not observed.
Property damage
Devices may be damaged if the pr
ecautions are not observed.
DANGER
WARNING
CAUTION
NOTICE

Table of Contents